Contact Us:Custom Switch

Your Details

Fields marked with * are mandatory.

Name * A value is required.Invalid format.A value is required. Company * A value is required.A value is required. Mailing Address * A value is required.A value is required. City State or Province Country Postal or Zipcode Phone A value is required.Invalid format.Invalid format. Fax Email * A value is required.Invalid format.A value is required. Invalid format. A value is required. Your Message

Your Application

In this section, describe where and how the switch will be used. You may fill in as much of this information as you wish. Leave unknown or undecided areas blank and we will assist you later.

Type of Industry where the switch will be used:

Use or purpose of switch:

Describe atmosphere to which switch will be
exposed -(normal, non-corrosive, etc. If corrosive, identify agents.)

Location:

Where will the switch be mounted?

Indoor Location
Outdoors, protected from the elements
Outdoors, exposed to the elements

Approximate ambient temperature range in ºF or ºC:

Sample media (air or other).

Agency approvals or recognitions required:

UL FM CSA CE Additional Comments:

The next three sections are optional. You may select from either Metal or Plastic switches, if you know which one you need. You may fill in as much of the switch information as you wish. Leave unknown or undecided areas blank and we will assist you later. You may also fill out Accessories information. If you do not wish to fill in any of this information, skip down to "Submit."

Metal Switch

To specify a rectangular metal switch, select style and range options, electrical and sample line connections, and special features.

Style & Range

Style:

Conduit Cover Open-mount

Range Options:

Nonadjustable Factory-set and sealed Adjustable

Required set point in inches water column:

Mounting Bracket:

1"-14 UNS, center bottom
Foot mount, right angle
Vertical strap, standard
#10-32 studs
7/16"-24UNS, center bottom
Horizontal strap
Custom

Electrical Requirements

Switching Action:

Change contacts on pressure or vacuum increase.
Change contacts on pressure or vacuum decrease.

Switching Logic:

SPDT DPDT SPST-NC SPST-NO

Electrical Rating:

300 VA pilot duty at 120 to 277 VAC; 15A noninductive to 277 VAC; 60 Hz.
120 VA pilot duty at 120 VAC; 5A noninductive at 120 to 277 VAC; 60 Hz.

Electrical Connection:

Screw terminals with cup washers
¼", 90° quick-connect terminals.
¼", 45° quick-connect terminals.
3/16", 90° quick-connect terminals.
3/16", 45° quick-connect terminals.
Wire leads. Specify:
Gauge: Length:

Sample Line Connectors

Sampling Type:

Positive only Negative only Differential Pressure

High Pressure/Vacuum

1/8"-27 NPT, female thread
1"-18 female thread with 1/8"-27NPT female thread
1/4" compression nut and ferrule
1/4" OD slip-on fitting
1/4" OD barbed fitting
No connection

Low Pressure/Vacuum

1/8"-27 NPT, female thread
1"-18 female thread with 1/8"-27NPT female thread
1/4" compression nut and ferrule
1/4" OD slip-on fitting
1/4" OD barbed fitting
No connection

Special Features

Select one or more:

NEMA-rated Housing:

None
NEMA-1
NEMA-4 Weatherproof
NEMA-9 Explosionproof

Gold contacts SPST-manual reset SPDT-manual reset Visual set point indicator Visual operation indicator Mechanical operation indicator Indicator light DPDT switching Interposing relay for DPDT switching Time delay relay Extended warranty(2-year) Name branding Individual boxes Individual boxes Custom packaging

Plastic Switch

To specify a round plastic switch, select style and range options, electrical and sample line connections, and special features.

Style & Range

Style:

Conduit Cover Open-mount

Range Options:

Nonadjustable Factory-set and sealed Adjustable

Required set point in inches water column:

Mounting Bracket:

1"-14 UNS, center bottom
Foot mount, right angle
Vertical strap, standard
#10-32 studs
7/16"-24UNS, center bottom
Horizontal strap
Custom

Electrical Requirements

Switching Action:

Change contacts on pressure or vacuum increase.
Change contacts on pressure or vacuum decrease.

Switching Logic:

SPDT DPDT SPST-NC SPST-NO

Electrical Rating:

300 VA pilot duty at 120 to 277 VAC; 15A noninductive to 277 VAC; 60 Hz.
120 VA pilot duty at 120 VAC; 5A noninductive at 120 to 277 VAC; 60 Hz.

Electrical Connection:

Screw terminals with cup washers
¼", 90° quick-connect terminals.
¼", 45° quick-connect terminals.
3/16", 90° quick-connect terminals.
3/16", 45° quick-connect terminals.
Wire leads. Specify:
Gauge: Length:

Sample Line Connectors

Sampling Type:

Positive only Negative only Differential Pressure

High Pressure/Vacuum

1/8"-27 NPT, female thread
1"-18 female thread with 1/8"-27NPT female thread
1/4" compression nut and ferrule
1/4" OD slip-on fitting
1/4" OD barbed fitting
No connection

Low Pressure/Vacuum

1/8"-27 NPT, female thread
1"-18 female thread with 1/8"-27NPT female thread
1/4" compression nut and ferrule
1/4" OD slip-on fitting
1/4" OD barbed fitting
No connection

Special Features

Select one or more:

NEMA-rated Housing:

None
NEMA-1
NEMA-4 Weatherproof
NEMA-9 Explosionproof

Gold contacts SPST-manual reset SPDT-manual reset Visual set point indicator Visual operation indicator Mechanical operation indicator Indicator light DPDT switching Interposing relay for DPDT switching Time delay relay Extended warranty(2-year) Name branding Individual boxes Individual boxes Custom packaging

Accessories

Under Construction

Cleveland Controls

Division of UniControl Inc.

Specify a Custom Switch

Links

Quick-Links

Location:

Agency approvals or recognitions required:

Style:

Range Options:

Mounting Bracket:

Switching Action:

Switching Logic:

Electrical Rating:

Electrical Connection:

Sampling Type:

High Pressure/Vacuum

Low Pressure/Vacuum

Select one or more:

NEMA-rated Housing:

Style:

Range Options:

Mounting Bracket:

Switching Action:

Switching Logic:

Electrical Rating:

Electrical Connection:

Sampling Type:

High Pressure/Vacuum

Low Pressure/Vacuum

Select one or more:

NEMA-rated Housing: